![]() Traffic between these ports is switched in hardware. ![]() ![]() This means that the router only really "sees" ether2. If the FreeBSD machine has a static of 192.168.88.245 set, why would you expect it to get a DHCP lease from the router?Īt the moment your router is configured as follows -Įther2 is a master port with 3,4 & 5 as slaves. Set authentication-types=wpa2-psk mode=dynamic-keys wpa-pre-shared-key=secretpassword wpa2-pre-shared-key=secretpasswordĪdd bridge=bridge comment=defconf interface=ether2-masterĪdd bridge=bridge comment=defconf interface=ether6-masterĪdd bridge=bridge comment=defconf interface=sfp1Īdd bridge=bridge comment=defconf interface=wlan1 ip address export ![]() Set band=2ghz-b/g/n channel-width=20/40mhz-Ce disabled=no distance=indoors frequency=auto mode=ap-bridge ssid=MikroTik-C79A9B wireless-protocol=802.11 ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |